Aircooled Engine Packages

Aircooled Engine Packages (Makes your “Roller Package” for Spyders or Pre-A Coupes a complete “Turn-key Package”)

 

2054cc Aircooled VW Type 1 – CB Performance built by Pat Downs (140 horsepower): 

  • Eagle Racing Camshafts
  • Engine Case - AS41 Dual Relief VW Universal Case
  • Maxi 30 Full Flow Oil Pump with Black Anodized Billet Cover with 3/8'' outlet
  • CB High Performance Case Kit
  • 28mm Ultralight Lifters
  • Rear Main Seal
  • Main Bearings STD
  • Rod Bearings Type-1 STD
  • Eagle Cam Gear
  • Push Rod Tubes
  • 044 Super Mag CNC Round Port (40 x 35.5) 94mm Bore
  • Thin Line Oil Sump - 1 1/2 qt.
  • Chromoly Push Rods - blank end (.035'')
  • Main Bearing Dowel Pins
  • Deflector Plates (10mm)
  • Engine Case Washer Set
  • Rubber-Coated Cam Plug
  • Flywheel - Lightweight Forged Chromoly - 200mm (o-ring seal)
  • Racing Gland Nut with Washer
  • Cylinder Head Studs - 8mm Chromoly - Dual Port
  • Camshaft Bearings – Racing
  • 74mm 4140 Forged Chromoly Crank - VW Rod Journal
  • Super Race Rods - VW rod journal - 5.500" length
  • Crankshaft Gear Assembly Kit w/Racer Spacer
  • CB Super Stock Rocker Arm Complete Kit 1.25:1 Ratio
  • End Play Shim Kit
  • Engine Case Lock Nut Kit
  • Gasket Set
  • Weld #3 Rear Case Web
  • Full Flow Case
  • BB Machine Case - Big Bore
  • Balance Complete Engine Kit
  • True-Arc Wrist Pin Locks
  • CB Speed Shop Billet Valve Covers - Black Anodized
  • Magnaspark II Kit
  • Magnaspark II2mm Wires
  • Magnaspark II Distributor
  • Magnaspark II Coil
  • Billet Distributor Clamp - Plain Finish
  • Black Fuel Pump Block Off with Dry Pack Coil Mount
  • 36hp Dog House Fan Shroud – Black (Unless upgrade to Bernie Bergmann 911 Style Fan Shroud)
  • Dual Port Cylinder Covers - Black
  • Late Model VW Cooling Fan (Welded)
  • Cooling Fan Mounting Hardware Kit
  • Stage 1 - 1700lb. 200mm Kennedy Clutch
  • Clutch Disc - 200mm
  • Racing Clutch Bolt Kit
  • Oil Cooler
  • Oil Cooler Adapter
  • Serpentine Belt System - Anodized Black
  • D6EA Spark Plugs - NGK Performance - 12mm - 3/4" Reach
  • Alternator Kit by CB engines
  • 200 MPH Alternator/Generator Clamp
  • 6mm Engine Cover Screws
  • 30wt Brad Penn Break-In Oil
  • XRP - #8 Male Flare to 1/2 Pipe Adapter
  • Weber Carbs - Dual 44 IDF Kit - Dual Port
  • XRP - #8 Male Flare to 3/8 Pipe Adapter
  • Super Big Bore Piston Kit (94 x 82mm Mahle)

     

    2276cc Aircooled VW Type 1 – CB Performance built by Pat Downs (160 horsepower):

    • Eagle Racing Camshafts
    • Engine Case - CB Super Case
    • Super Race Rods - VW rod journal - 5.400" length
    • Maxi 30 Full Flow Oil Pump with Black Anodized Billet Cover with 3/8'' outlet
    • CB High Performance Case Kit
    • 28mm Ultralight Lifters
    • Rear Main Seal
    • Main Bearings STD
    • Rod Bearings Type-1 STD
    • Eagle Cam Gear
    • Push Rod Tubes - Racing
    • 044 Super Pro Cylinder Heads
    • Thin Line Oil Sump - 1 1/2 qt.
    • Super Big Bore Piston Kit (94 x 82mm Mahle)
    • True-Arc Wrist Pin Locks
    • CB Speed Shop Billet Valve Covers - Black Anodized
    • Main Bearing Dowel Pins
    • Deflector Plates (10mm)
    • Engine Case Washer Set
    • Rubber-Coated Cam Plug
    • Super Race Crank - 82mm Stroke - VW Journals
    • Cylinder Head Gaskets - Copperhead - 94mm 0.040" thick
    • Flywheel - Lightweight Forged Chromoly - 200mm (o-ring seal)
    • Racing Gland Nut with Washer
    • Cylinder Head Studs - 8mm Chromoly - Dual Port
    • Camshaft Bearings – Racing
    • Crankshaft Gear Assembly Kit w/Racer Spacer
    • CB Super Stock Rocker Arm Complete Kit 1.25:1 Ratio
    • End Play Shim Kit
    • Engine Case Lock Nut Kit
    • Gasket Set
    • Stage 1 - 1700lb. 200mm Kennedy Clutch
    • Clutch Disc - 200mm
    • Racing Clutch Bolt Kit
    • Balance Complete Engine Kit
    • Magnaspark II
    • Magnaspark II2mm Wires
    • Magnaspark II Distributor
    • Magnaspark II Coil
    • Billet Distributor Clamp - Plain Finish
    • Weber Carbs - Dual 44 IDF Kit -Dual Port
    • Port match manifolds to Super Pro Heads
    • Aluminum Dual Taper Super Duty Push Rods

       

      2840cc Porsche Type 4 engine w/911 Fan Shroud - FAT Performance built by Greg Aronson (200 horsepower):

      Dyno broken-in and tested. 205 horsepower on pump gas. 12 month/12,000 mile warranty on our high-performance engines. All of our Type 4 engines are built by Greg Aronson and Ron Fleming and their crew at FAT Performance. FAT Performance has over 44 years of business and a combined 100+ years of race engine hands-on building experience.

      Please contact Daniel Verwers at: daniel@seductionmotorsports.com for Type 4 specs.